accessible_forward
Accessibility Statement. Read more.
2007 DEWALT DC920 DC930 DC935 DC936 DC940 INDIVIDUAL CORDLESS DRILLS SAFETY RECALL
SAFETY RECALL NOTICE
Safety Announcement: DEWALT DC920, DC930, DC935, DC936, DC940 Individual Cordless Drills Safety Recall
DEWALT Industrial Tool Company is recalling to repair the following 12 Volt, 14.4 Volt, 18 Volt Heavy-Duty XRP™ Individual Cordless Drills. The trigger switch could over-heat which presents a possible risk of fire.
The following drills may be affected:
| Model Number | Description | Affected Date/Code Range |
| DC920 | Heavy-Duty XRP™ 1/2" (13mm) 18 Volt Cordless Drill/Driver | 200723 through 200741 |
| DC930 | Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Cordless Drill/Driver | 200625 through 200746 |
| DC935 | Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Hammerdrill/Cordless Drill/Driver |
200627 through 200746 |
| DC936 | Heavy-Duty XRP™ 1/2" (13mm) 14.4 Volt Hammerdrill/Cordless Drill/Driver | 200635 through 200746 |
| DC940 | Heavy-Duty XRP™ 1/2" (13mm) 12 Volt Cordless Drill/Driver | 200635 through 200746 |
ONLY DRILLS WITH THE MODEL NUMBERS AND DATE CODES LISTED ABOVE ARE AFFECTED
Products stamped with an “M” following the date code have been repaired and are NOT affected by this recall.
The location of the date code is shown on the photograph below.
If your drill is affected, STOP USING IT IMMEDIATELY, and call DEWALT toll-free 1-888-742-9168 between 8:00 AM and 5:00 PM Eastern Time, Monday through Friday or go to www.DEWALT.com for the location of a service center to obtain a free inspection and repair, if necessary.
Recall done in cooperation with U.S. Consumer Product Safety Commission.