accessible_forward
Accessibility Statement. Read more.
BUILT TO LAST™
FEATURED CATEGORIES
CUTTING
DEMOLITION CARBIDE TIPPED RECIPROCATING SAW BLADES
Tackle demanding demolition with precision-welded carbide blades, select sizes designed to deliver up to 30% longer life vs. DIABLO®†. Engineered with IRON BLAST™ Technology, these blades are strengthened to resist fatigue and teeth stripping.
DRILLING
COBALT ALLOY STEEL DRILL BITS
Power through stainless steel and other hard metals with DEWALT ELITE SERIES™ Cobalt Alloy Steel Drill Bits. These high-quality bits are designed to start on contact and select sizes deliver up to 2X longer life vs. Milwaukee®†††.
FASTENING
IMPACT BITS
Combat the effects of heavy usage with DEWALT ELITE SERIES™ Impact Bits. Designed with a FLEXTORQ® Zone that helps provide longer life††, each DEWALT ELITE SERIES™ PH2 bit delivers up to 2X more screws per bit vs. Milwaukee®‡.
OUR BEST PERFORMING 20V MAX* BATTERIES & POWER TOOLS‡‡
Built to deliver confidence for the world's toughest pros, the next generation of 20V MAX* XR® keeps you a step ahead.
STORAGE BUILT DIFFERENTLY
Make sure you have what you need, where you need it with a wide range of storage options designed to deliver the possibilities needed to take on the job.
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18.
†DEWALT ELITE SERIES (TM) 6TPI Carbide Tip Reciprocating saw blade DWAR656CT, DWAR965CT, and DWAR156CT vs. DIABLO® DS0606CWX blade cutting 2 in. x 4 in. Fir with Stainless Steel Nails. DIABLO® is a registered trademark of Freud America, Inc., which has not endorsed, approved, or sponsored this comparison.
††On average using DWAL3HLDFT bit-tip holder (sold separately) vs. standard DEWALT screwdriving bits.
‡Bit life while setting screws vs. Milwaukee® Shockwave® Impact Duty PH2 screwdriving bits. Milwaukee and Shockwave are registered trademarks of Milwaukee Electric Tool Corp., which has not endorsed or approved this comparison.
‡‡Regarding battery, based on longer life (charge cycles) and more power, not in application vs. DEWALT 20V MAX* batteries with comparable amp hours.
**Based on either product design or specified product application with respect to number of holes, number of cuts, amount of material removed or magnetic strength.
†††Vs. Milwaukee® cobalt drill bits, drillng into 1/8 in. low carbon steel at 1200 RPM for the following sizes: 1/8 in., 9/64 in., 5/32 in., 3/16 in., 13/64 in., 7/32 in., 15/64 in., 1/4 in., 3/8 in., and 1/2 in. Milwaukee is a registered trademark of Milwaukee Electric Tool Corp., which has not endorsed or approved this comparison.